Description & Specification
This bundle is based upon the FX4300 Black Edition Unlocked Quad Core processor running with at a speed of 4.0GHz and Corsair Vengenace LP 8GB (2X4GB) of 1600MHz DDR3 Memory. These are installed and tested in the socket AM3+ Gigabyte 970A-UD3 motherboard, utilizing AMD 970A chipset with 8+2 Phase Power, PCIe x16 slot with CrossFireX support, & Gigabit LAN, USB3.0, SATA 6GBPS making it ideal for any high range system.
- AMD Bulldozer FX4300 Quad Core Processor running at 4.0GHz
- Branded Corsair Memory 8GB (4x2GB) DDR3 1600Mhz Dual Channel Memory Kit
- Gigabyte 970A Chipset ATX Motherboard
- Arctic Freezer A30 CPU Cooler - Virtually Silent operation
Every bundle comes with a processor, heatsink/fan and memory pre-installed and is tested & setup by our technical team before being despatched from our warehouse.
We recommend using a branded power supply eg Corsair HX/TX, OCZ ZT range. Your PSU will require a 24pin ATX and 8pin 12V connector.
Please note: These motherboard bundles are assembled on demand to order and usually ship within 48hrs of the order being placed. During busy time periods these can increase upto 72 hours.
AMD FX4300 4.0Ghz Quad Core Processor - installed
North Bridge: AMD 970
South Bridge: AMD SB950
Corsair 8GB Vengeance LP 1600MHz Dual Channel Kit - installed
4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory (Note 1)
Dual channel memory architecture
Support for DDR3 2000(O.C.)/1866/1600/1333/1066 MHz memory modules (Note 2)
(Please refer "Memory Support List" for more information.)
High Definition Audio
Support for S/PDIF Out
1 x Realtek RTL8111E chip (10/100/1000 Mbit)
1 x PCI Express x16 slot, running at x16 (PCIEX16)
1 x PCI Express x16 slot, running at x4 (PCIEX4)
3 x PCI Express x1 slots
(All PCI Express slots conform to the PCI Express 2.0 standard.)
2 x PCI slots
Support for AMD CrossFireX™ technology (PCIEX16 and PCIEX4)
Storage Interface South Bridge:
6 x SATA 6Gb/s connectors supporting up to 6 SATA 6Gb/s devices
Support for RAID 0, RAID 1, RAID5, RAID 10 and JBOD
USB South Bridge:
Up to 14 USB 2.0/1.1 ports (8 ports on the back panel, 6 ports available through the internal USB headers)
2 x Etron EJ168 chips:
Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
IEEE 1394 VIA VT6308 chip:
Up to 2 IEEE 1394a ports (1 port on the back panel, 1 port available through the internal IEEE 1394a header)
Internal I/O Connectors
1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
6 x SATA 6Gb/s connectors
1 x CPU fan header
2 x system fan headers
1 x power fan header
1 x front panel header
1 x front panel audio header
1 x S/PDIF Out header
3 x USB 2.0/1.1 headers
1 x USB 3.0/2.0 header
1 x IEEE 1394a header
1 x Trusted Platform Module (TPM) header
1 x serial port header
1 x clearing CMOS jumper
Back Panel Connectors
1 x PS/2 keyboard/mouse port
1 x optical S/PDIF Out connector
1 x IEEE 1394 port
8 x USB 2.0/1.1 ports
2 x USB 3.0/2.0 ports
1 x RJ-45 port
6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
ITE IT8720 chip
System voltage detection
CPU/System temperature detection
CPU/System/Power fan speed detection
CPU overheating warning
CPU/System/Power fan fail warning
CPU/System fan speed control (Note 3)
2 x 32 Mbit flash
Use of licensed AWARD BIOS
Support for DualBIOS™
PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Support for Microsoft Windows 7
ATX Form Factor; 30.5cm x 24.4cm
(Note 1) Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
(Note 2) To support a DDR3 1866 MHz (and above) memory, you must install an AMD AM3+ CPU first.
(Note 3) Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.
(Note 4) Available functions in EasyTune may differ by motherboard model.
Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP SP1/SP2. If drivers are available from the vendors, we will update them on the GIGABYTE website.